Miss Burton Kent

Case Study

Tarmac Driveway Installation in Kent
30th October 2019

Customer, Miss Natalie Burton in Kent needed off road parking for one car but only had a 1 metre wide path leading up to the house.

The entrance was widened by disk cutting the perimeter wall and excavating and clearing the existing garden soil and chippings to a depth of 300mm. A 150mm layer of stone to dust was applied, levelled and compacted then infilling and compacting any indentations to ensure a level base running away from the house.

miss burton tarmac driveway surfacing

Red brick paviors were installed and cemented in as decorative edging before laying a 50mm thick base coat before a 30mm top wearing coat with 6mm fine stone finish was applied to a total thickness of approximately 80mm.

The pavement was also resurface at a gradient away from the house to prevent flooding as had happened on previous occasions.